| Autor |
Nachricht |
|
|
Titel: ipn2220 installed , almost works I think
 Verfasst am: 25.05.2006, 09:04 Uhr
|
|
Anmeldung: 21. Jul 2005
Beiträge: 8
|
|
it is on a msi s270. only using 32bit kanotix easter rc4. It is installed, loads when I boot the computer. This is what I get from various commands:
"root@KanotixBox:~# ifconfig
wlan0 Link encap:Ethernet HWaddr 00:11:09:2A:8E:E9
inet addr:192.168.1.101 Bcast:192.168.1.254 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:217 Memory:fbffe800-fbfff000
root@KanotixBox:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:2347 B Fragment thr:2346 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@KanotixBox:~# ndiswrapper -l
Installed drivers:
neti2220 driver installed, hardware present"
I thought I did everything I was told too in the ndiswrapper wiki and found myself with an unreadable network interfaces,
and a network which wouldn't load,so eventually deleted the files I created.
Following the removal of everything I created I am back to the situation above which is where I started. The ndiswrapper wiki says I cannot find an ap. As in essid off/any. It works fine in windows xp. I have no encryption running as the router craps out if I try to run wep or wpa.
I am so close to having kanotix usuable day to day this is so frustrating.
Hopefully someof you can help.
cheers |
|
|
| |
|
|
|
 |
|
|
|
Titel:
Verfasst am: 25.05.2006, 13:05 Uhr
|
|
Anmeldung: 22. Mar 2006
Beiträge: 82
Wohnort: dayton, oh usa
|
|
|
|
|
|
|
|
|
Titel:
Verfasst am: 26.05.2006, 01:58 Uhr
|
|
Anmeldung: 21. Jul 2005
Beiträge: 8
|
|
Thanks,
yep, that is how I did it. My past experience with dhclient hasn't been helpful but I will try again.
Mike  |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 27.05.2006, 00:38 Uhr
|
|
Anmeldung: 21. Jul 2005
Beiträge: 8
|
|
I tried dhclient and it worked this time.
"root@KanotixBox:~# dhclient
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
eth1: unknown hardware address type 24
eth1: unknown hardware address type 24
Listening on LPF/eth1/<null>
Sending on LPF/eth1/<null>
Listening on LPF/eth0/00:0c:76:f8:ad:70
Sending on LPF/eth0/00:0c:76:f8:ad:70
Listening on LPF/lo/<null>
Sending on LPF/lo/<null>
Listening on LPF/wlan0/00:11:09:2a:8e:e9
Sending on LPF/wlan0/00:11:09:2a:8e:e9
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
receive_packet failed on wlan0: Network is down
receive_packet failed on eth0: Network is down
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPOFFER from 192.168.1.254
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.254
bound to 192.168.1.101 -- renewal in 21600 seconds."
How do I turn off eth0 (probably ethernet)and eth1(probably bluetooth) and get wlan0 to correctly start?
cheers |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 27.05.2006, 19:25 Uhr
|
|
Anmeldung: 16. Aug 2004
Beiträge: 1905
|
|
|
|
|
|
|
|
|
Titel:
Verfasst am: 28.05.2006, 01:46 Uhr
|
|
Anmeldung: 21. Jul 2005
Beiträge: 8
|
|
Thanks,
I will open a terminal and turn them off.
there is no line turning them on in interfaces so how do I stop them turning on.
Ftab maybe, iftab? |
|
|
| |
|
|
|
|
|
|
