| Autor |
Nachricht |
|
|
Titel: kernel 2.17.x und rt2500?????
 Verfasst am: 24.07.2006, 11:20 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Hi,
habe ein sehr seltsames Problem. Wenn ich in meinem Kanotix versuche die rt2500 Wlan-Karte zu altivieren erzählt mir mein System, daß die Karte nicht kann:
ifup eth0
Fehlermeldung:
Device or resource busy
unable to bring up eth0
MEHR NICHT!!!!!
Das ganze passiert wenn ich Kernel-Versionen benutze neuer als 2.6.17. Mit dem Kernel 2.6.17 funzt das. Das ist doch nicht normal. Im systlog steht eine Fehlermeldung, die mich auf ein "irq handler mismatch" hinweisst. Sitze gerade nicht am Rechner, deshalb kann ich es nicht posten. Werde das aber dann bald tun!
Hat bis dahin jemand ne Idee! I need help!!!! Danke schon mal!! |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
 |
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 11:24 Uhr
|
|
Team Member
Anmeldung: 06. Mai 2005
Beiträge: 3087
Wohnort: berlin
|
|
butter,
gcc 4.1 ist installiert?
das entsprechende modul rt2500 aus dem kernel zip auch?
greetz
devil |
_________________
<<We are Xorg - resistance is futile - you will be axximilated>>
Host/Kernel/OS "devilsbox" running[2.6.19-rc1-git5-kanotix-1KANOTIX-2006-01-RC4 ]
CPU Info AMD Athlon 64 3000+ clocked at [ 803.744 MHz ]
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 12:12 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
| Ja! Alles installiert! Habe sogar rt2500-source schon kompiliert, alles geal! Mit 2.6.17 gehts, gcc kanns also nicht sein!?!?! |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 12:39 Uhr
|
|
Team Member
Anmeldung: 06. Mai 2005
Beiträge: 3087
Wohnort: berlin
|
|
butter,
kano meint, du solltest ndiswrapper 1.21 nehmen. damit geht auch wpa.
greetz
devil |
_________________
<<We are Xorg - resistance is futile - you will be axximilated>>
Host/Kernel/OS "devilsbox" running[2.6.19-rc1-git5-kanotix-1KANOTIX-2006-01-RC4 ]
CPU Info AMD Athlon 64 3000+ clocked at [ 803.744 MHz ]
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 12:58 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Ich kann mal den ndiswrapper ausprobieren. Wpa geht allerdings mit dem 2.6.17er Kernel auch. Ich habe mir dazu von der sourceforge-Seite rutilt runtergeladen. Vielleicht kennst du das. Ist ein frontend mit der man die rt2500 kontrollieren kann. Der Treiber kann ja eh wpa! ( Wenn ich ihn ansprechen könnte  ) Sogar wpa2!
Hat Kano auch ne kurze Anleitung für die Verwendung von rt2500, ndiswrapper und wpa. Dazu müsste ich ja die iwpriv-befehle nutzen?!? Oder geht das dann auch mit dem frontend? Bin schon gespannt!!
Werde mich dann mal melden wenn ich das ganze probiert habe? |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 12:59 Uhr
|
|
Team Member
Anmeldung: 06. Mai 2005
Beiträge: 3087
Wohnort: berlin
|
|
wenn du nicht klarkommst, komm am besten nach #kanotix, geht am schnellsten
greetz
devil |
_________________
<<We are Xorg - resistance is futile - you will be axximilated>>
Host/Kernel/OS "devilsbox" running[2.6.19-rc1-git5-kanotix-1KANOTIX-2006-01-RC4 ]
CPU Info AMD Athlon 64 3000+ clocked at [ 803.744 MHz ]
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 13:00 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 16809
|
|
Das geht direkt mit netcardconfig oder noch kürzer mit:
allow-hotplug wlan0
iface wlan0 inet dhcp
pre-up sleep 1
wpa-ssid SSID
wpa-psk "Passphrase"
in der /etc/network/interfaces. rt2500 löschen, ndiswrapper korrekt einstellen, mit
ndiswrapper -da
dann noch ndiswrapper automatisch laden lassen. fertig. |
|
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 24.07.2006, 13:09 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Ich werde es heute Abend ausprobieren! Erst mal vielen Dank!!!!!!!
Melde mich obs gefunzt hat! |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 06:20 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
So nun bin ich wieder da. War leider nicht so erfreulich... aber von Anfang an.
Ich habe wie Kano es gepostet hat das rt2500-Module ausgeladen, den ndiswrapper konfiguriert und geladen. Er erzählte auch braf, daß die hardware present sei und arbeitet. Allerdings kamen beim ifup eine Menge Fehlermeldungen, die darauf hinwiesen, daß irgendwas mit der Verschüsselung und dem Modul wext nicht stimmt. hmmmm..... Ich habe dann also die Version von ndiswrapper kontrolliert und festgestellt, daß ich 1.19 drauf habe. Kano meinte ja 1.21. Diese ist auch per apt-cache zu finden und heisst ndiswrapper-common. Installiert ist das Paket, benutzt wird jedoch die Version 1.19 aus meinem frisch installiertem Kernel 2.6.17.6. Mache ich da nen Denkfehler?
Desweiteren habe ich mal mein System durchforstet und dabei festegestellt, daß in der /etc/modprobe.conf, in der rt2500 geladen wird, "alias ra0 rt2500" eingetragen war. Mein wlan heisst aber eth0! also habe ich das geändert auf eth0, hat aber auch nichts gebracht. Weiterhin kommt die Fehlermeldung Device or resource busy.
Also dachte ich mir schalte ich mal den bootlog ein um eventuell irgendwas zu finden, was ich vergessen hatte. Der geht nicht!!!!! Weigert sich beim start automatisch zu starten!!!
Habe ich eventuell ein grösseres Problem?
Ach ja.... wenn ich im init3 das ifup eth0 mache kommt einen interessante Fehlermeldung. Ich musste mich ganz schön Anstrengen um das zu posten.
setup_irq: irq handler mismatch
<c013ae38> setup_irq+0x128/0x150 <c013aee1> request_irq+0x81/0xa0
<e0c5e9d4> RT2500_open+0x94/0x1e0 [rt2500] <e0c5e7f0> RTMPIsr+0x0/0x150 [rt2500]
<c0336331> dev_open+0x31/0x70 <c0334c60> dev_change_flags+0xe0/0x120
<c037b52d> devinet_ioctl+0x53d/0x690 <c032acf6> sock_ioctl+0xe6/0x1e0
<c016f85c> do_ioctl+0x1c/0x70 <c016f902> vfs_ioctl+0x52/0x2d0
<c016fbdd> sys_ioctl+0x5d/0x70 <c0102f07> syscall_call+0x7/0xb
SIOCSIFFLAGS: Device or resource busy
setup_irq: irq handler mismatch
<c013ae38> setup_irq+0x128/0x150 <c013aee1> request_irq+0x81/0xa0
<e0c5e9d4> RT2500_open+0x94/0x1e0 [rt2500] <e0c5e7f0> RTMPIsr+0x0/0x150 [rt2500]
<c0336331> dev_open+0x31/0x70 <c0334c60> dev_change_flags+0xe0/0x120
<c037b52d> devinet_ioctl+0x53d/0x690 <c032acf6> sock_ioctl+0xe6/0x1e0
<c016f85c> do_ioctl+0x1c/0x70 <c016f902> vfs_ioctl+0x52/0x2d0
<c016fbdd> sys_ioctl+0x5d/0x70 <c0102f07> syscall_call+0x7/0xb
SIOCSIFFLAGS: Device or resource busy
Failed to bring up eth0
Damit kann ich nichts anfangen!!!! Irgendwie muss es ja gehen...... |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 06:56 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Habe gerade noch was rausgefunden, bzw. mir ist was aufgefallen!
demsg erzählt mir was setlsames:
ve [20060127]
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 8100-810f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
ACPI: Embedded Controller [EC] (gpe 11) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
Generic PHY: Registered new driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:05.0
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0xe680-0xe6ed has been reserved
pnp: 00:06: ioport range 0xe6f2-0xe6f7 has been reserved
pnp: 00:06: ioport range 0xfe10-0xfe11 could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: e0100000-e01fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A]: no GSI
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:553a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:11.1, from 0 to 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x9060-0x9067, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9068-0x906f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS726060M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 6342.000 MB/sec
raid5: using function: pIII_sse (6342.000 MB/sec)
raid6: int32x1 716 MB/s
raid6: int32x2 735 MB/s
raid6: int32x4 659 MB/s
raid6: int32x8 529 MB/s
raid6: mmxx1 1616 MB/s
raid6: mmxx2 2965 MB/s
raid6: sse1x1 1271 MB/s
raid6: sse1x2 1987 MB/s
raid6: sse2x1 2083 MB/s
raid6: sse2x2 3073 MB/s
raid6: using algorithm sse2x2 (3073 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
EDAC MC: Ver: 2.0.0 Jul 16 2006
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 MD97 USB1 USB2 USB3 USB4 SLPB LID
ACPI: (supports S0 S3 S4 S5)
spurious 8259A interrupt: IRQ7.
Freeing unused kernel memory: 276k freed
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
input: PC Speaker as /class/input/input1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 9
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 9, io base 0x00009000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PS/2 Mouse as /class/input/input2
input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 11
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 11, io base 0x00009020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:10.3: irq 5, io mem 0xe0008c00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:0c.0[A]: no GSI
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4701]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
Yenta: request_irq() in yenta_probe_cb_irq() failed!
Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x00c0, PCI irq 0
Socket status: 30000006
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt 0000:00:06.0[A]: no GSI - using IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0008000-e00087ff] Max Packet=[2048] IR/IT contexts=[4/8]
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xe084e800, 00:90:f5:32:1e:32, IRQ 9
PCI: Enabling device 0000:00:05.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:05.0[A]: no GSI
rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
PCI: Setting latency timer of device 0000:00:05.0 to 64
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xe8000000
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 10
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 10, io base 0x00009040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ts: Compaq touchscreen protocol output
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.6 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
Linux video capture interface: v1.00
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x3000-0x7fff: clean.
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.05
cs: IO port probe 0xa00-0xaff: clean.
usb 4-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8/0x301B)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000321e32]
usb 4-1: No supported image sensor detected
usbcore: registered new driver zc0301
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_probe:5480] Camera type JPEG
/tmp/pkg/modules/spca5xx/drivers/usb/zc3xx.h: [zc3xx_config:487] Find Sensor UNKNOW_0 force Tas5130
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_getcapability:1765] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver spca5xx
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered
Adding 1028156k swap on /dev/hda2. Priority:-1 extents:1 across:1028156k
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0xc, vid 0x2
Capability LSM initialized
fuse init (API version 7.6)
usbcore: registered new driver cinergyT2
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'
wlan: 0.8.4.2 (0.9.1)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Thermal Zone [THRM] (57 C)
lp0: using parport0 (interrupt-driven).
lp0: console ready
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
[fglrx] total GART = 134217728
[fglrx] free GART = 118222848
[fglrx] max single GART = 118222848
[fglrx] total LFB = 126791680
[fglrx] free LFB = 116002816
[fglrx] max single LFB = 116002816
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
r8169: eth1: link up
In dem Abschnitt mit Yenta scheint doch irgendwas nicht in Ordnung zu sein?!? |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 12:27 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 16809
|
|
Der ganze müll mit modprobe.conf kommt ja nur davon,wenn man manull treiber installiert, für die es pakete gibt... Lösch das file. Dann
dpkg --purge rt2500-modules-$(uname -r)
ndiswrapper -da
update-modules -f
Solltest du kein Paket benützt haben guckst mit modinfo rt2500 nach wo es ist und löscht es halt manuell.
m-a a-i ndiswrapper
sollt dir ndiswrapper updaten, es läuft mit 1.19, aber es ist nicht stabil. |
|
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 12:34 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Ich schäm mich ja schon!!!!!  Werde ganz artig dem Rat folge leisten!!!!
Danke! |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 12:55 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Also Kano,
ich habe jetzt alles so gemacht wie gesagt hast. Ging auch wunderbar. Beim Start wird jetzt ndiswrapper 1.21 geladen, der Treiber funzt und ich habe mich schon gefreut! Aber.....
alized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:05.0
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0xe680-0xe6ed has been reserved
pnp: 00:06: ioport range 0xe6f2-0xe6f7 has been reserved
pnp: 00:06: ioport range 0xfe10-0xfe11 could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: e0100000-e01fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A]: no GSI
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:553a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:11.1, from 0 to 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x9060-0x9067, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9068-0x906f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS726060M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 5996.000 MB/sec
raid5: using function: pIII_sse (5996.000 MB/sec)
raid6: int32x1 717 MB/s
raid6: int32x2 735 MB/s
raid6: int32x4 653 MB/s
raid6: int32x8 528 MB/s
raid6: mmxx1 1608 MB/s
raid6: mmxx2 2965 MB/s
raid6: sse1x1 1226 MB/s
raid6: sse1x2 1948 MB/s
raid6: sse2x1 2045 MB/s
raid6: sse2x2 3048 MB/s
raid6: using algorithm sse2x2 (3048 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
EDAC MC: Ver: 2.0.0 Jul 16 2006
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 MD97 USB1 USB2 USB3 USB4 SLPB LID
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 276k freed
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt 0000:00:0c.0[A]: no GSI
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4701]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
Yenta: request_irq() in yenta_probe_cb_irq() failed!
Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
ieee1394: Initialized config rom entry `ip1394'
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.101 (c) Dave Jones
Yenta: ISA IRQ mask 0x0a68, PCI irq 0
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:06.0[A]: no GSI - using IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0008000-e00087ff] Max Packet=[2048] IR/IT contexts=[4/8]
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xe0cda800, 00:90:f5:32:1e:32, IRQ 9
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xe8000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 5, io mem 0xe0008c00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 9
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 9, io base 0x00009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: PS/2 Mouse as /class/input/input2
input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 11
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 11, io base 0x00009020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 10
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 10, io base 0x00009040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ndiswrapper version 1.21 loaded (preempt=yes,smp=no)
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ndiswrapper: driver m2500 (802.11 Wireless,02/16/2004, 2.02.01.0000) loaded
PCI: Enabling device 0000:00:05.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:05.0[A]: no GSI
PCI: Setting latency timer of device 0000:00:05.0 to 64
setup_irq: irq handler mismatch
<c013ae38> setup_irq+0x128/0x150 <c013aee1> request_irq+0x81/0xa0
<e0d92b03> NdisMRegisterInterrupt+0x83/0xf0 [ndiswrapper] <e0d92b70> ndis_isr+0x0/0x80 [ndiswrapper]
<e0d9d6d3> miniport_init+0x83/0x120 [ndiswrapper] <e0d9d7f5> NdisDispatchPnp+0x65/0x7a0 [ndiswrapper]
<e0d9d802> NdisDispatchPnp+0x72/0x7a0 [ndiswrapper] <e0d95be1> get_current_nt_thread+0xa1/0xb0 [ndiswrapper]
<e0d99efc> IoQueueThreadIrp+0xc/0xb0 [ndiswrapper] <e0d9a087> IoBuildSynchronousFsdRequest+0x37/0x40 [ndiswrapper]
<e0d9931d> IofCallDriver+0x2d/0x50 [ndiswrapper] <e0d9b2d3> IoSendIrpTopDev+0x73/0xb0 [ndiswrapper]
<e0d98519> KeInitializeEvent+0x69/0x70 [ndiswrapper] <e0d9b4c2> pnp_start_device+0x32/0x80 [ndiswrapper]
<e0d9b643> wrap_pnp_start_device+0x133/0x190 [ndiswrapper] <c022cc82> pci_device_probe+0x42/0x60
<c027f1cb> driver_probe_device+0x3b/0xa0 <c027f2a0> __driver_attach+0x0/0x60
<c027f2fc> __driver_attach+0x5c/0x60 <c027ebf9> bus_for_each_dev+0x49/0x70
<c027f125> driver_attach+0x15/0x20 <c027f2a0> __driver_attach+0x0/0x60
<c027e80b> bus_add_driver+0x6b/0x130 <c027f55e> driver_register+0x3e/0x90
<c022cdeb> __pci_register_driver+0x3b/0x70 <e0d8fc2d> wrapper_ioctl+0x55d/0x6c0 [ndiswrapper]
<c016f89a> do_ioctl+0x5a/0x70 <c016f902> vfs_ioctl+0x52/0x2d0
<c015b56b> filp_close+0x3b/0x60 <c016fbdd> sys_ioctl+0x5d/0x70
<c0102f07> syscall_call+0x7/0xb
ndiswrapper: request for irq 0 failed
usb 4-1: new full speed USB device using uhci_hcd and address 2
ndiswrapper (NdisWriteErrorLogEntry:241): log: C000138C, count: 0, return_address: e0de563a
ndiswrapper (miniport_init:264): couldn't initialize device: C000009A
ndiswrapper (pnp_start_device:428): Windows driver couldn't initialize the device (C0000001)
ndiswrapper (miniport_halt:327): device df173280 is not initialized - not halting
Trying to free free IRQ0
ndiswrapper: device eth%d removed
unregister_netdevice: device eth%d/df173000 never was registered
ndiswrapper: probe of 0000:00:05.0 failed with error -22
ts: Compaq touchscreen protocol output
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000321e32]
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0xc00-0xcff:<6>usb 4-1: configuration #1 chosen from 1 choice
excluding 0xcf8-0xcff
cs: IO port probe 0x3000-0x7fff: clean.
cs: IO port probe 0xa00-0xaff: clean.
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usbcore: registered new driver ndiswrapper
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.6 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
Linux video capture interface: v1.00
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.05
usb 4-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8/0x301B)
usb 4-1: No supported image sensor detected
usbcore: registered new driver zc0301
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_probe:5480] Camera type JPEG
/tmp/pkg/modules/spca5xx/drivers/usb/zc3xx.h: [zc3xx_config:487] Find Sensor UNKNOW_0 force Tas5130
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: [spca5xx_getcapability:1765] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver spca5xx
/tmp/pkg/modules/spca5xx/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered
Adding 1028156k swap on /dev/hda2. Priority:-1 extents:1 across:1028156k
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0xc, vid 0x2
Capability LSM initialized
fuse init (API version 7.6)
usbcore: registered new driver cinergyT2
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'
wlan: 0.8.4.2 (0.9.1)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Thermal Zone [THRM] (58 C)
lp0: using parport0 (interrupt-driven).
lp0: console ready
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
[fglrx] total GART = 134217728
[fglrx] free GART = 118222848
[fglrx] max single GART = 118222848
[fglrx] total LFB = 126791680
[fglrx] free LFB = 116002816
[fglrx] max single LFB = 116002816
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
Ich glaube da läuft irgendwas schief! Mit dem Kernel 2.6.17-kanotix-1 läuft die Sache egal ob mit ndiswrapper oder mit dem Kernel-Module!
Trotzdem schon mal danke! Will dich ja nicht nerven, aber es gibt hier im Forum nicht viele, die so tief drin stecken wie du! War ein Lob!!!!! |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 14:26 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 16809
|
|
| Hmm. Geht wohl bei dir wohl nur mit nem SMP Kernel. |
|
|
| |
|
|
|
|
|
|
|
Titel: RE: kernel 2.17.x und rt2500?????
Verfasst am: 25.07.2006, 14:55 Uhr
|
|
Anmeldung: 13. Apr 2006
Beiträge: 75
|
|
Ja, wie denn?????? Gibt es einen Standardkernel mit smp für 32bit????? Muss ich mir den selber backen? Ich versteh die Welt net mehr. Wieso geht das ganze denn eigentlich mit dem 2.6.17er?
By the way.... Was bedeutet eigentlich m-a a-i ndiswrapper? Also ich meine natürlich m-a a-i?
Dann werde ich heute Abend mal Kernel backen...... Wie sieht as ganze dann eigentlich mit Kernel-upgrades aus? Muss ich dann jedesmal das Dingen backen?
Auf jeden Fall schon mal riesig Danke! |
_________________
Laptop AMD64 3200, 512MB Ram, ATI9700
kanotix-2006-01-RC4, up-to-date
2.6.18.3-slh-smp-1 mit Gnome 2.14
|
| |
|
|
|
|
|
|
|
|
|
|
