kanotix.com

Networking - No internet in live cds rc1/ 3

wegface - 30.09.2006, 12:01 Uhr
Titel: No internet in live cds rc1/ 3
Hmm i can get dhcp to work in either the live cds with my broadcom ethernet- even tho they work on my installed and d-u'd kanotix. Ive tried everything i can think of, heres the error:

root@1[knoppix]# ifup eth0
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.

Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html

Listening on LPF/eth0/00:0d:56:5f:6a:af
Sending on LPF/eth0/00:0d:56:5f:6a:af
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
send_packet: Message too long
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
send_packet: Message too long
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
send_packet: Message too long
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
send_packet: Message too long
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
send_packet: Message too long
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
send_packet: Message too long
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
send_packet: Message too long
No DHCPOFFERS received.
No working leases in persistent database.

Exiting.

Failed to bring up eth0.

network card configuration doesnt help- it thinks its set up but actually it doesnt work.

(EDIT): having googled around i noticed this:
https://launchpad.net/distros/ubuntu/+s ... +bug/58927
Possibly connected- i'll try it out
ockham23 - 30.09.2006, 12:13 Uhr
Titel: RE: No internet in live cds rc1/ 3
There are several possible causes:
1. faulty iso file/bad burn
2. IRQ problem, try the following cheat codes (single or in combinations)
noapic
nolapic
acpi=off
pci=routeirq
irqpoll


Please post output of
Code:
lspci | grep -i ethernet
ifconfig -a
cat /proc/interrupts

wegface - 30.09.2006, 19:36 Uhr
Titel:
Problem fixed by following the thread i posted
using command: ifconfig eth0 mtu 1400
And i guess on an installed version- following the other advice in the same thread would be sufficient- i cant test as my install is fine anyway. Suprosed no-one else has run into this- guess i must have the crappest router here Winken
DeepDayze - 30.09.2006, 19:40 Uhr
Titel:
what router you have, wegface? My Linksys works fine with default MTU of 1500
wegface - 30.09.2006, 20:52 Uhr
Titel:
E-tech thing. i got sent it from holland from my mate there- its a bit flakey really. Whats causing it is changed default settings in new dhcp version. Some routers return incorrect mtu values and this causes dhcp to error. I think. The ubuntu link explains it anyway.
op4latino - 01.10.2006, 04:49 Uhr
Titel:
When I get that "No working leases in persistent database. " all I do is disconnect the power of the router for like 10 sec and ifconfig -a works again. I don't know if that is a good practice, tho.

PS. Router is a linksys
Alle Zeiten sind GMT + 1 Stunde
PNphpBB2 © 2003-2007